Текущая версия |
Ваш текст |
Строка 43: |
Строка 43: |
| | | |
| ;; Подключение шаблона со стандартными настройками. | | ;; Подключение шаблона со стандартными настройками. |
− | include = /etc/php/7.0/fpm/pool.d/templates/default | + | include = /etc/php5/fpm/pool.d/templates/default |
| | | |
| | | |
− | ;; Specify the nice(2) priority to apply to the pool processes (only if set)
| + | ;; Статический режим создания рабочих процессов - число запущенных процессов пула равно максимальному. |
− | ;; The value can vary from -19 (highest priority) to 20 (lower priority)
| + | |
− | ;; Note: - It will only work if the FPM master process is launched as root
| + | |
− | ;; - The pool processes will inherit the master process priority
| + | |
− | ;; unless it specified otherwise
| + | |
− | ;; Default Value: no set
| + | |
− | ; process.priority = -19
| + | |
− | | + | |
− | ;; Статический режим создания рабочих процессов - число запущенных процессов пула равно максимальному (pm.max_children). | + | |
| ; pm = static | | ; pm = static |
| ;; Динамический режим создания рабочих процессов - число запущенных процессов пула зависит от нагрузки. | | ;; Динамический режим создания рабочих процессов - число запущенных процессов пула зависит от нагрузки. |
| pm = dynamic | | pm = dynamic |
− | ;; При запуски рабочие процессы не создаются, они будут ответвлены при подключении новых запросов.
| |
− | ; pm = ondemand
| |
| | | |
− | ;; Максимальное количество процессов пула, которые могут существовать одновременно. | + | ;; Максимальное количество процессов пула. |
| pm.max_children = 5 | | pm.max_children = 5 |
| | | |
− | ;; Количество рабочих процессов при запуске. | + | ;; Количество рабочих процессов при запуске службы. |
− | ;; Используется только при pm = dynamic.
| + | |
| pm.start_servers = 2 | | pm.start_servers = 2 |
| | | |
| ;; Минимальное число простаивающих рабочих процессов. | | ;; Минимальное число простаивающих рабочих процессов. |
| ;; Для экономии ресурсов можно приравнять к pm.start_servers. | | ;; Для экономии ресурсов можно приравнять к pm.start_servers. |
− | ;; Замечание: Используется и только при pm = dynamic, причём в этом случае обязательно.
| |
| pm.min_spare_servers = 1 | | pm.min_spare_servers = 1 |
| | | |
| ;; Максимальное число простаивающих рабочих процессов. | | ;; Максимальное число простаивающих рабочих процессов. |
| ;; От pm.min_spare_servers до pm.max_children. | | ;; От pm.min_spare_servers до pm.max_children. |
− | ;; Замечание: Используется и только при pm = dynamic, причём в этом случае обязательно.
| |
| pm.max_spare_servers = 3 | | pm.max_spare_servers = 3 |
− |
| |
− | ;; Количество секунд, после которых простаивающий процесс будет убит.
| |
− | ;; Замечание: используется только при pm = ondemand.
| |
− | ; pm.process_idle_timeout = 10s;
| |
| | | |
| ;; Количество обработанных запросов, после которого процессы PHP-FPM будут перезагружены. | | ;; Количество обработанных запросов, после которого процессы PHP-FPM будут перезагружены. |
− | ;; Значение по-умолчанию: 0.
| |
| pm.max_requests = 500</pre> | | pm.max_requests = 500</pre> |
| | | |
Строка 91: |
Строка 73: |
| Файлы шаблонов можно сохранять, например, в директорию <tt>/etc/php/7.0/fpm/pool.d/templates/</tt>. | | Файлы шаблонов можно сохранять, например, в директорию <tt>/etc/php/7.0/fpm/pool.d/templates/</tt>. |
| | | |
− | Например, стандартные настройки пула в файле <tt>/etc/php/7.0/fpm/pool.d/templates/default</tt> | + | Например, стандартные настройки пула в файле <tt>/etc/php7.0/fpm/pool.d/templates/default</tt> |
− | <pre>;; Префикс для пула. | + | <pre>;; Порт и необязательный адрес или имя UNIX-сокета. |
− | ;; Виляет только на следующие директивы:
| + | |
− | ;; - 'access.log'
| + | |
− | ;; - 'slowlog'
| + | |
− | ;; - 'listen' (unixsocket)
| + | |
− | ;; - 'chroot'
| + | |
− | ;; - 'chdir'
| + | |
− | ;; - 'php_values'
| + | |
− | ;; - 'php_admin_values'
| + | |
− | ;; Если не задан, используется глобальный префикс (или /usr).
| + | |
− | ;; Примечание: эта директива может указывать относительный префикс к глобальному.
| + | |
− | ;; Значение по умолчанию: none.
| + | |
− | ; prefix = /path/to/pools/$pool
| + | |
− | | + | |
− | | + | |
− | ;; Порт и необязательный адрес или имя UNIX-сокета. | + | |
| ;; Используется для взаимодействия с WEB-сервером. | | ;; Используется для взаимодействия с WEB-сервером. |
| ; listen = 127.0.0.1:9000 | | ; listen = 127.0.0.1:9000 |
− | listen = /var/run/php/php7.0-fpm_$pool.sock | + | listen = /var/run/php7.0-fpm_$pool.sock |
| | | |
− | ;; Размер очереди одновременно ожидающих подключений к сокету.
| + | ;; Пользователь и группа, которые владеют файлом UNIX-сокета. |
− | ;; Значение по-умолучению: 511 (-1 on FreeBSD and OpenBSD)
| + | |
− | ; listen.backlog = 511
| + | |
− | | + | |
− | ;; Пользователь и группа, которые владеют файлом UNIX-сокета, если он используется. | + | |
| ;; Пользователь, от имени которого работает WEB-сервер, должен иметь права на чтение. | | ;; Пользователь, от имени которого работает WEB-сервер, должен иметь права на чтение. |
− | ;; По-умолчанию, совпадают с пользователем и группой, от имени которых запущен процесс.
| |
| listen.owner = www-data | | listen.owner = www-data |
| listen.group = www-data | | listen.group = www-data |
Строка 125: |
Строка 87: |
| ; listen.mode = 0660 | | ; listen.mode = 0660 |
| | | |
− | ;; When POSIX Access Control Lists are supported you can set them using
| |
− | ;; these options, value is a comma separated list of user/group names.
| |
− | ;; When set, listen.owner and listen.group are ignored
| |
− | ; listen.acl_users =
| |
− | ; listen.acl_groups =
| |
| | | |
− | ;; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect. | + | ;; Ограничение по времени, после которого запросы будут считаться медленными. |
− | ;; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
| + | ; request_slowlog_timeout = 0 |
− | ;; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
| + | |
− | ;; must be separated by a comma. If this value is left blank, connections will be
| + | |
− | ;; accepted from any ip address.
| + | |
− | ;; Default Value: any | + | |
− | ; listen.allowed_clients = 127.0.0.1
| + | |
− | | + | |
− | | + | |
− | ;; The URI to view the FPM status page. If this value is not set, no URI will be
| + | |
− | ;; recognized as a status page. It shows the following informations:
| + | |
− | ;; pool - the name of the pool;
| + | |
− | ;; process manager - static, dynamic or ondemand;
| + | |
− | ;; start time - the date and time FPM has started;
| + | |
− | ;; start since - number of seconds since FPM has started;
| + | |
− | ;; accepted conn - the number of request accepted by the pool;
| + | |
− | ;; listen queue - the number of request in the queue of pending
| + | |
− | ;; connections (see backlog in listen(2));
| + | |
− | ;; max listen queue - the maximum number of requests in the queue
| + | |
− | ;; of pending connections since FPM has started;
| + | |
− | ;; listen queue len - the size of the socket queue of pending connections;
| + | |
− | ;; idle processes - the number of idle processes;
| + | |
− | ;; active processes - the number of active processes;
| + | |
− | ;; total processes - the number of idle + active processes;
| + | |
− | ;; max active processes - the maximum number of active processes since FPM
| + | |
− | ;; has started;
| + | |
− | ;; max children reached - number of times, the process limit has been reached,
| + | |
− | ;; when pm tries to start more children (works only for
| + | |
− | ;; pm 'dynamic' and 'ondemand');
| + | |
− | ;; Value are updated in real time.
| + | |
− | ;; Example output:
| + | |
− | ;; pool: www
| + | |
− | ;; process manager: static
| + | |
− | ;; start time: 01/Jul/2011:17:53:49 +0200
| + | |
− | ;; start since: 62636
| + | |
− | ;; accepted conn: 190460
| + | |
− | ;; listen queue: 0
| + | |
− | ;; max listen queue: 1
| + | |
− | ;; listen queue len: 42
| + | |
− | ;; idle processes: 4
| + | |
− | ;; active processes: 11
| + | |
− | ;; total processes: 15
| + | |
− | ;; max active processes: 12
| + | |
− | ;; max children reached: 0
| + | |
− | ;;
| + | |
− | ;; By default the status page output is formatted as text/plain. Passing either
| + | |
− | ;; 'html', 'xml' or 'json' in the query string will return the corresponding
| + | |
− | ;; output syntax. Example:
| + | |
− | ;; http://www.foo.bar/status
| + | |
− | ;; http://www.foo.bar/status?json
| + | |
− | ;; http://www.foo.bar/status?html
| + | |
− | ;; http://www.foo.bar/status?xml
| + | |
− | ;;
| + | |
− | ;; By default the status page only outputs short status. Passing 'full' in the
| + | |
− | ;; query string will also return status for each pool process.
| + | |
− | ;; Example:
| + | |
− | ;; http://www.foo.bar/status?full
| + | |
− | ;; http://www.foo.bar/status?json&full
| + | |
− | ;; http://www.foo.bar/status?html&full
| + | |
− | ;; http://www.foo.bar/status?xml&full
| + | |
− | ;; The Full status returns for each process:
| + | |
− | ;; pid - the PID of the process;
| + | |
− | ;; state - the state of the process (Idle, Running, ...);
| + | |
− | ;; start time - the date and time the process has started;
| + | |
− | ;; start since - the number of seconds since the process has started;
| + | |
− | ;; requests - the number of requests the process has served;
| + | |
− | ;; request duration - the duration in µs of the requests;
| + | |
− | ;; request method - the request method (GET, POST, ...);
| + | |
− | ;; request URI - the request URI with the query string;
| + | |
− | ;; content length - the content length of the request (only with POST);
| + | |
− | ;; user - the user (PHP_AUTH_USER) (or '-' if not set);
| + | |
− | ;; script - the main script called (or '-' if not set);
| + | |
− | ;; last request cpu - the %cpu the last request consumed
| + | |
− | ;; it's always 0 if the process is not in Idle state
| + | |
− | ;; because CPU calculation is done when the request
| + | |
− | ;; processing has terminated;
| + | |
− | ;; last request memory - the max amount of memory the last request consumed
| + | |
− | ;; it's always 0 if the process is not in Idle state
| + | |
− | ;; because memory calculation is done when the request
| + | |
− | ;; processing has terminated;
| + | |
− | ;; If the process is in Idle state, then informations are related to the
| + | |
− | ;; last request the process has served. Otherwise informations are related to
| + | |
− | ;; the current request being served.
| + | |
− | ;; Example output:
| + | |
− | ;; ************************
| + | |
− | ;; pid: 31330
| + | |
− | ;; state: Running
| + | |
− | ;; start time: 01/Jul/2011:17:53:49 +0200
| + | |
− | ;; start since: 63087
| + | |
− | ;; requests: 12808
| + | |
− | ;; request duration: 1250261
| + | |
− | ;; request method: GET
| + | |
− | ;; request URI: /test_mem.php?N=10000
| + | |
− | ;; content length: 0
| + | |
− | ;; user: -
| + | |
− | ;; script: /home/fat/web/docs/php/test_mem.php
| + | |
− | ;; last request cpu: 0.00
| + | |
− | ;; last request memory: 0
| + | |
− | ;;
| + | |
− | ;; Note: There is a real-time FPM status monitoring sample web page available
| + | |
− | ;; It's available in: /usr/share/php/7.0/fpm/status.html
| + | |
− | ;;
| + | |
− | ;; Note: The value must start with a leading slash (/). The value can be
| + | |
− | ;; anything, but it may not be a good idea to use the .php extension or it
| + | |
− | ;; may conflict with a real PHP file.
| + | |
− | ;; Default Value: not set
| + | |
− | ; pm.status_path = /status
| + | |
− | | + | |
− | ;; The ping URI to call the monitoring page of FPM. If this value is not set, no
| + | |
− | ;; URI will be recognized as a ping page. This could be used to test from outside
| + | |
− | ;; that FPM is alive and responding, or to
| + | |
− | ;; - create a graph of FPM availability (rrd or such);
| + | |
− | ;; - remove a server from a group if it is not responding (load balancing);
| + | |
− | ;; - trigger alerts for the operating team (24/7).
| + | |
− | ;; Note: The value must start with a leading slash (/). The value can be
| + | |
− | ;; anything, but it may not be a good idea to use the .php extension or it
| + | |
− | ;; may conflict with a real PHP file.
| + | |
− | ;; Default Value: not set
| + | |
− | ; ping.path = /ping
| + | |
− | | + | |
− | ;; This directive may be used to customize the response of a ping request. The
| + | |
− | ;; response is formatted as text/plain with a 200 response code.
| + | |
− | ;; Default Value: pong
| + | |
− | ; ping.response = pong
| + | |
− | | + | |
− | | + | |
− | ;; Файл с логом проблем доступа.
| + | |
− | ;; По-умолчанию: не задан.
| + | |
− | ; access.log = log/$pool.access.log
| + | |
− | | + | |
− | ;; The access log format.
| + | |
− | ;; The following syntax is allowed
| + | |
− | ;; %%: the '%' character
| + | |
− | ;; %C: %CPU used by the request
| + | |
− | ;; it can accept the following format:
| + | |
− | ;; - %{user}C for user CPU only
| + | |
− | ;; - %{system}C for system CPU only
| + | |
− | ;; - %{total}C for user + system CPU (default)
| + | |
− | ;; %d: time taken to serve the request
| + | |
− | ;; it can accept the following format:
| + | |
− | ;; - %{seconds}d (default)
| + | |
− | ;; - %{miliseconds}d
| + | |
− | ;; - %{mili}d
| + | |
− | ;; - %{microseconds}d
| + | |
− | ;; - %{micro}d
| + | |
− | ;; %e: an environment variable (same as $_ENV or $_SERVER)
| + | |
− | ;; it must be associated with embraces to specify the name of the env
| + | |
− | ;; variable. Some exemples:
| + | |
− | ;; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
| + | |
− | ;; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
| + | |
− | ;; %f: script filename
| + | |
− | ;; %l: content-length of the request (for POST request only)
| + | |
− | ;; %m: request method
| + | |
− | ;; %M: peak of memory allocated by PHP
| + | |
− | ;; it can accept the following format:
| + | |
− | ;; - %{bytes}M (default)
| + | |
− | ;; - %{kilobytes}M
| + | |
− | ;; - %{kilo}M
| + | |
− | ;; - %{megabytes}M
| + | |
− | ;; - %{mega}M
| + | |
− | ;; %n: pool name
| + | |
− | ;; %o: output header
| + | |
− | ;; it must be associated with embraces to specify the name of the header:
| + | |
− | ;; - %{Content-Type}o
| + | |
− | ;; - %{X-Powered-By}o
| + | |
− | ;; - %{Transfert-Encoding}o
| + | |
− | ;; - ....
| + | |
− | ;; %p: PID of the child that serviced the request
| + | |
− | ;; %P: PID of the parent of the child that serviced the request
| + | |
− | ;; %q: the query string
| + | |
− | ;; %Q: the '?' character if query string exists
| + | |
− | ;; %r: the request URI (without the query string, see %q and %Q)
| + | |
− | ;; %R: remote IP address
| + | |
− | ;; %s: status (response code)
| + | |
− | ;; %t: server time the request was received
| + | |
− | ;; it can accept a strftime(3) format:
| + | |
− | ;; %d/%b/%Y:%H:%M:%S %z (default)
| + | |
− | ;; The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
| + | |
− | ;; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
| + | |
− | ;; %T: time the log has been written (the request has finished)
| + | |
− | ;; it can accept a strftime(3) format:
| + | |
− | ;; %d/%b/%Y:%H:%M:%S %z (default)
| + | |
− | ;; The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
| + | |
− | ;; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
| + | |
− | ;; %u: remote user
| + | |
− | ;;
| + | |
− | ;; Default: "%R - %u %t \"%m %r\" %s"
| + | |
− | ; access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
| + | |
| | | |
| ;; Файл лога медленно обрабатываемых запросов. | | ;; Файл лога медленно обрабатываемых запросов. |
− | ;; Обязателен, если задан request_slowlog_timeout. | + | ;; Обязателен, если задан request_slowlog_timeout |
| ; slowlog = log/$pool.log.slow | | ; slowlog = log/$pool.log.slow |
− |
| |
− | ;; Ограничение по времени, после которого запросы будут считаться медленными.
| |
− | ;; Значение '0s' означает отключение.
| |
− | ;; Доступные единицы: s - секунды (по-умолчанию), m - минуты, h - часы, d - дни
| |
− | ; request_slowlog_timeout = 0
| |
− |
| |
− | ;; The timeout for serving a single request after which the worker process will
| |
− | ;; be killed. This option should be used when the 'max_execution_time' ini option
| |
− | ;; does not stop script execution for some reason. A value of '0' means 'off'.
| |
− | ;; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
| |
− | ;; Default Value: 0
| |
− | ; request_terminate_timeout = 0
| |
− |
| |
− | ;; Set open file descriptor rlimit.
| |
− | ;; Default Value: system defined value
| |
− | ; rlimit_files = 1024
| |
− |
| |
− | ;; Set max core size rlimit.
| |
− | ;; Possible Values: 'unlimited' or an integer greater or equal to 0
| |
− | ;; Default Value: system defined value
| |
− | ; rlimit_core = 0
| |
| | | |
| | | |
| ;; Считать /var/www/$pool корневой директорией для скриптов. | | ;; Считать /var/www/$pool корневой директорией для скриптов. |
| ;; Нужно скорректировать все пути и обеспечить доступ к файлам сокетов и другим необходимым службам внутри этой директории. | | ;; Нужно скорректировать все пути и обеспечить доступ к файлам сокетов и другим необходимым службам внутри этой директории. |
− | ; chroot = /var/www/$pool | + | ; chroot = /var/www/$pool</pre> |
− | | + | |
− | ;; Перейти в дирректорию после запуска.
| + | |
− | ;; Примечание: может быть использован относительный путь.
| + | |
− | ;; Значение по-умолчанию: текущая директория или / при использовании chroot.
| + | |
− | ; chdir = /var/www
| + | |
− | | + | |
− | | + | |
− | ; Redirect worker stdout and stderr into main error log. If not set, stdout and
| + | |
− | ; stderr will be redirected to /dev/null according to FastCGI specs.
| + | |
− | ; Note: on highloaded environement, this can cause some delay in the page
| + | |
− | ; process time (several ms).
| + | |
− | ; Default Value: no
| + | |
− | ;catch_workers_output = yes
| + | |
− | | + | |
− | | + | |
− | ; Clear environment in FPM workers
| + | |
− | ; Prevents arbitrary environment variables from reaching FPM worker processes
| + | |
− | ; by clearing the environment in workers before env vars specified in this
| + | |
− | ; pool configuration are added.
| + | |
− | ; Setting to "no" will make all environment variables available to PHP code
| + | |
− | ; via getenv(), $_ENV and $_SERVER.
| + | |
− | ; Default Value: yes
| + | |
− | ;clear_env = no
| + | |
− | | + | |
− | ; Limits the extensions of the main script FPM will allow to parse. This can
| + | |
− | ; prevent configuration mistakes on the web server side. You should only limit
| + | |
− | ; FPM to .php extensions to prevent malicious users to use other extensions to
| + | |
− | ; exectute php code.
| + | |
− | ; Note: set an empty value to allow all extensions.
| + | |
− | ; Default Value: .php
| + | |
− | ;security.limit_extensions = .php .php3 .php4 .php5 .php7
| + | |
− | | + | |
− | ;; Передать переменные октужения, такие как LD_LIBRARY_PATH.
| + | |
− | ;; Все $VARIABLEs берутся из текущего окружения.
| + | |
− | ;; По-умолчанию, env пустой.
| + | |
− | env[HOSTNAME] = $HOSTNAME
| + | |
− | env[PATH] = /usr/local/bin:/usr/bin:/bin
| + | |
− | ; env[TMP] = /tmp
| + | |
− | ; env[TMPDIR] = /tmp
| + | |
− | ; env[TEMP] = /tmp</pre>
| + | |
| | | |
| === Изменение глобальных настроек PHP === | | === Изменение глобальных настроек PHP === |
Строка 443: |
Строка 153: |
| Есть множество пакетов, дополняющих возможности [[PHP-FPM]]. | | Есть множество пакетов, дополняющих возможности [[PHP-FPM]]. |
| Для учета изменений после установки модулей нужно перезапустить службу | | Для учета изменений после установки модулей нужно перезапустить службу |
− | sudo service php7.0-fpm restart | + | # service php5-fpm restart |
| | | |
| === memcached === | | === memcached === |
| Для кэширования данных в оперативной памяти. | | Для кэширования данных в оперативной памяти. |
− | sudo apt-get install memcached php-memcached | + | # apt-get install memcached php5-memcached |
| | | |
| === MySQL === | | === MySQL === |
| Для работы с базой данных [[MySQL]]. | | Для работы с базой данных [[MySQL]]. |
− | sudo apt-get install mysql-server mysql-client php-mysql | + | # apt-get install mysql-server mysql-client php5-mysql |
| | | |
− | === php-gd === | + | === php5-gd === |
| Для обработки изображений. | | Для обработки изображений. |
− | sudo apt-get install php-gd | + | # apt-get install php5-gd |
| | | |
− | === php-imagick === | + | === php5-imagick === |
| Для продвинутой обработки изображений. | | Для продвинутой обработки изображений. |
− | sudo apt-get install imagemagick php-imagick | + | # apt-get install imagemagick php5-imagick |
| | | |
| == Ссылки == | | == Ссылки == |